2020 MERIDA eOne-Forty 4000

2020 MERIDA eOne-Forty 4000

  • £4,350.00


eOne-Forty 4000 - (S) Gloss Sparkling Red/Matt Black

SPECIFICATION

FRAME
  • Carbon
  • Carbon front triangle with easily removable integrated battery, satellite on/off switch, on-bike charging port and “thermo gate”
SHOCK
  • RS-EDGE-TR-LO-R8-M6; lockout
FORK
  • Suntour Raidon 34 LOR; Air; 140 mm travel; Tapered steerer; 51mm fork offset
HUBS
  • Shimano MT400-B; 110 x 15mm axle; 32 spoke; Centerlock front and Shimano MT400-B; 148 x 12mm axle; 36 spoke; Centerlock rear with Merida Comp TR rear axle including removeable lever, 6/4mm al
RIMS
  • Merida Comp TR; 29 mm inner width; 29" front and 27.5" rear
SPOKES
  • Black stainless
INNER TUBES
  • Front Lite-29x2.5-3.0, Rear Lite-27.5x2.5-3.0
TYRES
  • Maxxis DHF; 29" x 2.5 "; Kevlar bead - folding; EXO TR Dual Compound front and Maxxis DHR II; 27.5" x 2.6 "; Kevlar bead - folding; EXO TR Dual Compound rear
SHIFTERS
  • Shimano Deore
DERAILLEURS
  • Shimano Deore Shadow+
CHAINSET
  • Shimano CRE70-B; 34 teeth with Shimano E8000 crank
CASSETTE
  • Shimano HG500; 11-42 teeth, 10 speed
BOTTOM BRACKET
  • Shimano E7000; 60Nm
  • Shimano Steps E7000; 60Nm motor
CHAIN
  • KMC e10S
PEDAL
  • VP; VPE-537
BRAKES
  • Shimano MT-420; 4 piston front and MT-400; 2 piston rear hydraulic disc brakes with Shimano RT30; 203 mm front and Shimano RTEM300; 180 mm rear rotors
GRIP
  • Merida Expert EC
HANDLEBAR
  • Merida Expert eTR; 780 mm wide; 20 mm rise
STEM
  • Merida Expert eTR; 35 mm diameter; 0 degree rise
HEAD SET
  • Merida 1901
SADDLE
  • Merida Comp CC
SEAT CLAMP
  • Merida Expert clamp
SEAT POST
  • Merida Comp TR; 30.9 mm diameter; 0mm layback S: 100 mm travel - M/L/XL/XXL: 125 mm travel
HARDWARE
  • Stainless
GENDER
  • Men's
TYPE
  • E Bike
STYLE
  • Full Suspension
FRAME MATERIAL
  • Carbon
RANGE
  • eOne-Forty
WHEEL SIZE
  • 29" / 27.5"
SEASON
  • 2020
GEARS
  • 10
COLOUR
  • Sparkling Red/Black

360°

"
"

TECHNOLOGY

THERMO GATE

Forged aluminium part integrated into the headtube.  Works like a chimney so hot air can rise up and escape. When riding, heat build up from the battery is not usually an issue, but if the bike was laid in the sun for a long time heat could build up.

WHEEL SIZE

Mixed wheel sizes to get the best of both worlds. 29" front wheel for better ‘roll over
performance’ with a 2.5" wide tyre for precise steering. 27.5" rear wheel with 2.6" tyres give
maximum traction and comfort. The smaller rear wheel size allows shorter chainstays for a more agile and playful character.

INTERNAL BLOCK 

To prevent the fork crown hitting the down tube we use an ‘Internal Block’ integrated into the frame. A clamp is installed on the fork steerer. If the steering angle is too extreme the clamp hits the rubber protection block inside the frame. Just in case the clamp does rotate on the steere, there's additional rubber protection under the head tube.

EASY CHARGING

The internal battery can be accessed easily, pulling a rubber strap, sliding forward the panel and opening, the battery can then be removed by a small turn of an Allen Key (provided).  But the battery doesn't need to be removed as a satellite charging port can be used.

RATTLE FREE

Two part battery cover, the outer layer reduces noise through its soft material and tight fit, while the hard plastic inner layer gives it the structural shape.  Key components i.e. the rubber strap and o-rings, can be replaced.  Almost all connection points between battery and frame have a rubber layer between them too.

BOTTLE BOSSES AND CABLE ROUTING

 

A new clamp system makes it easy to organise and route cables inside the downtube whilst also providing bottle bosses on the outside. Bottle cages can be put in two positions. The upper one must be used when a piggyback shock is mounted. For Gen II a bottle can be mounted to all frame sizes.

BATTERY WAKE UP

If the bike has not been used for more than 6 months, or when the battery of the on/off switch is empty (this battery is normally charged by the main battery) it's necessary to wake the battery up again, simply push a 4mm Allen key (on the Merida Expert TR axle) through the hole on the downtube and press the hidden button underneath

LIFETIME WARRANTY

Covers the entire ownership of the original purchaser. This applies to manufacturing and material defects and includes bikes used for racing.*A rider and equipment weight limit of 120kg applies.